Tool to remove the fork caps / plugs, specific for the following fork :    OHLINS  TTX25 / NIX / FGRT

Tool to remove the fork caps / plugs, specific for the following fork :    OHLINS FGK 4 PIN

Tool to remove the fork caps / plugs, specific for the following fork :   OHLINS FGK 8 PIN

Clutch nut locking pliers     Made of stainless steel Locking vice-grip type Maximum spacing 122mm Total length 29.5cm Adjustable spacing by means of a thumbwheel Allows clutch nut to be locked for tightening and loosening Prevents damage to the nut

Tool to remove the fork caps, diameter 49 / 50 mm with 8 sides.

Tool to remove the fork caps, diameter 48 mm with 8 sides.

Tool to remove the fork caps, diameter 49 mm with 6 sides.

Tool to remove the fork caps, diameter  46 / 50 mm with 8 sides.

Mixed 30 and 55mm socket in aluminium, specific to the following  DUCATI .(non exhaustive list at the bottom of the description)   Made of aluminium for excellent resistance and durability 30mm hexagon socket for front wheel axles A 55mm 12-sided socket for the rear wheel nuts Suitable for a large...

Automatic Safety Wire Pliers      Locking ring to keep pliers closed Cutting pliers section Knurl with worm screw for interweaving the safety wire Wire not supplied

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.

Assortment box of insulated electrical crimp connectors - 180 pcs    3 different sizes Red : for cables with a cross-section of up to 1.5mm². Blue : for cables with cross-sections from 1 to 2.5mm². Yellow : for cables with cross-sections from 2.6 to 6mm². <p...

Small universal toolbox to be stowed (ideally) under the seat of your motorcycle. Ideal for emergency use.  Delivered as shown on the photos.

Hook spanner for damper 55 mm. Made of treated steel for better durability.

Pair of radiator hose removal tools    Non-slip handle Steel shaft diameter 6mm 1 model at 180° 1 model at 90° For removing cooling hoses without damaging them

Bi-function screwdriver for carburettor adjustment    L-shaped spanner with 8mm hexagon socket Usable length 28.5cm 1 flat screwdriver  Usable length 29.5cm Ideal for adjusting your carburettor timing

Internal / external circlip pliers with interchangeable tips 4 different tips : 2 flat 1 bent at 45° 1 bent at 90° For circlips from 10 to 50mm Internal or external circlips depending on tip position Interchangeable tips in seconds

Transmission Chain Cleaning Brush Hard plastic with nylon bristles Easy grease removal and maintenance  Dual Use: One side for cleaning the chain and one side for the crown and corners Time-saving with its "U" shape for cleaning chain links in a single pass Preserve your chain for a longer life Ideal for increasing the life...