Rear brake fluid reservoir  cap for  many  HONDA  models.   Dimensions : 55 x 35 mm Distance between the mounting Holes: 42mm     You will find the motorcycles compatibility list below.

Universal Oil draining and stocking pan.   LENGTH : 60 cm WIDTH : 33 cm THICKNESS : 10,5 cm JERRYCAN CAPACITY : 8 Liters INPUT DIAMETER : 2,75 cm OUTPUT DIAMETER : 3,8 cm    Sold per unit, as displayed on pictures. 

Self-retracting ratchet strap and its 2 "S" shaped hooks. Measurements and technical information : LENGTH 1 : 5,0 m LENGTH 2 (partie avec cliquet) : 37 cm WIDTH : 2,5 cm FIXATION TYPE : "S" Shaped hooks with rubber protection      Sold by pair, such as shown in the pictures.

Universel overflow collector, suitable for most motorbikes.    LENGTH : 132 mm WIDTH : 80 mm THICKNESS : 48 mm JERRYCAN CAPACITY : 250 ml INPUT DIAMETER : 8 mm OUTPUT DIAMETER : 15 mm TIE DOWN LENGTH : 390 mm HOSE : 8 mm x 2000 mm    Sold as shown on the...

Pair of universal  LED  turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color).

Pair of universal  LED  turn signals in plastic, with 17 LED and an orange light.

Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims.   Width : 7 mm Length : 6m

Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side.   Ready to apply on 17” clean rims.   Width : 6mm

Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided) or with an integrated  6mm  threaded spot (6 mm screw provided).  Remember to check...

USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V , and USB plug, output in 5V , sold with its handlebar fastening system. The measurements are displayed in the last picture.

6 parts universal tank pad protection, adaptable on all gas tanks.

Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one...

Universal USB plug / charger.  Model with USB output in 5V , sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm Socket diameter : 27 mm

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset.   Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided)....

Pair of universal LED turn signals in plastic with 5 SMD  LEDs  on the front, and 3 SMD LEDs on the rear side, both in orange.

Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mm Height (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

Adhesive tank pad protection, design NC750X

Wheel rim tape with NC   logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 3 parts per side of the front and rear rims with 8 bonus strips.   Width : about 1 cm.

Side kickstand foot enlarger, in anodized aluminum, specific for the following  HONDA  :       NC700 / 750 S 2012 - 2018 NC700 / 750 X 2014 - 2020 INTEGRA 700 / 750 2012 - 2017 CBR 500 R 2013 - 2015 CB 500 F / X 2013 - 2015 CBR / CB 650 F 2014 -...

Box of heat shrink tubings / sleeves made of polyolefin. The kit is composed of 150 pieces. For details, please refer to the table below.