Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals.   Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

Protection slider for front fork specific to the following APRILIA , MOTO GUZZI , DUCATI.  List of compatibilities per motorcycle models are available below for further information.    Note  : pictures accurately display the kit, as you will receive it. Only the...

Front Brake fluid reservoir cap for many  DUCATI  models. You will find the motorcycles compatibility list below.   Technical informations : Diameter : 56mm Only suitable for BREMBO Front Brake Master Cylinder reservoirs (Axial AND Radial). If you have any doubt,...

Pair of adhesive grips for the tank sides (right and left traction pads). Specific for DUCATI :     <td...

Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.    Measurements and technical information : LENGTH : 18 cm Unwound LENGTH : 1,6 m WIDTH : 2,6 cm FIXATION TYPE : "S" Hooks with rubber protection    Sold by...

Set of EBC brake pads intended for use on the road Pads approved for road use (TÜV approved) IMPORTANT: Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here. You will find the list of compatible motorbikes below in the description.

Set of EBC brake pads intended for use on the road Pads approved for road use (TÜV approved) IMPORTANT: Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here. You will find the list of compatible motorbikes below in the description.

Set of EBC brake pads Performance designed for intensive use, exclusively for track use. Pads NOT Approved for road use IMPORTANT : Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here. You will find the list of compatible motorbikes below in the...

Pair of universal  LED  turn signals in aluminum and an orange lighting.  Number of LED on each turn signal : 17 Length (out of screw thread) : 86 mm Width : 38 mm Screw diameter : 8 mm Wires length : 210 mm

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow...

Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided). These handlebar caps can also be installed on handlebars with an integrated  6mm  threaded spot (6 mm screw provided)....

Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light.

Pair of universal  LED  turn signals in aluminum.  E8 E-marked  model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

Pair of universal  LED  turn signals in plastic.  E8 E-marked  model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a  turn signal shutter  so the nut can be screwed on the turn signal's rod. 

Pair of universal  LED  turn signals in plastic with 8 LEDs and an orange light.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth:...

Pair of universal  LED  turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).

Pair of universal  LED  turn signals in aluminum. New model with 1 powerful LED light, orange color.

Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims.    Note : Depending on models, you may need to recut some of the tape, more information available below.