Shark fin / Protector for swing arm in aluminium. Universal model.

Clutch nut locking pliers     Made of stainless steel Locking vice-grip type Maximum spacing 122mm Total length 29.5cm Adjustable spacing by means of a thumbwheel Allows clutch nut to be locked for tightening and loosening Prevents damage to the nut

Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution , this is an...

Long clutch lever specific to many APRILIA, DUCATI, KAWASAKI, MV AGUSTA, TRIUMPH, BENELLI, BIMOTA and MOTO MORINI models. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part of the lever and 6...

Short clutch lever specific to many APRILIA, DUCATI, KAWASAKI, MV AGUSTA, TRIUMPH, BENELLI, BIMOTA and MOTO MORINI models. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part of the lever and 6...

Long brake lever specific to many models. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice within the 8 available colors in the comments before you...

Short brake lever specific to many models Detailed list of compatibilities per motorcycle & year below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice (8 available colors) in the comment before you finalize...

Protection slider for front fork specific to the following APRILIA , MOTO GUZZI , DUCATI.  List of compatibilities per motorcycle models are available below for further information.    Note  : pictures accurately display the kit, as you will receive it. Only the...

Front Brake fluid reservoir cap for many  APRILIA  models. You will find the motorcycles compatibility list below.   Technical informations : Diameter : 56mm Only suitable for BREMBO Front Brake Master Cylinder reservoirs (Axial AND Radial). If you have any doubt, check the...

Rear-view mirrors block-off plates for the following  APRILIA  :    RSV 1000 2004 – 2008 RSV 1000R 2004 - 2008   Distance between the fastening points : 47mm   Sold by pair.

Pair of adhesive grips for the tank sides (right and left traction pads). Specific for APRILIA :     RSV / FACTORY 1000R  2004 - 2008 TUONO 1000 R 2006 - 2010      Non-slip with a finish similar to sandpaper (type 240 for beginner in car painting).

Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.    Measurements and technical information : LENGTH : 18 cm Unwound LENGTH : 1,6 m WIDTH : 2,6 cm FIXATION TYPE : "S" Hooks with rubber protection    Sold by...

Set of EBC brake pads intended for use on the road Pads approved for road use (TÜV approved) IMPORTANT: Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here. You will find the list of compatible motorbikes below in the description.

Set of EBC brake pads Performance designed for intensive use, exclusively for track use. Pads NOT Approved for road use IMPORTANT : Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here. You will find the list of compatible motorbikes below in the...

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow...

Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap.   Fits on all handlebars with an internal diameter of  14mm  or  18mm  (adapters provided). These handlebar caps can also be installed on handlebars with an integrated  6mm  threaded spot (6 mm screw provided)....

Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M6 fastening thread, for example :  All Yamaha, Aprilia, Triumph models until 2011.

Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of  22 mm  on the left side (clutch) and  24 mm  on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth:...

Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims.    Note : Depending on models, you may need to recut some of the tape, more information available below.