Short clutch lever specific to many DUCATI models.
The detailed list of compatibilities per motorcycle and year is available below.
If you want a color combination...
Short clutch lever specific to many DUCATI models.
The detailed list of compatibilities per motorcycle and year is available below.
If you want a color combination...
Short brake lever specific to many models.
Detailed list of compatibilities per model of motorcycle available below.
If you want a colour combination (lever's body and adjusting wheel) that is not proposed in the list below, please specify you choice (within the 8 colours we propose) in your order's comment's section.
Short brake lever specific to many models.
Detailed list of compatibilities per model of motorcycle available below.
If you want a colour combination (lever's body and adjusting wheel) that is not proposed in the list below, please specify you choice (within the 8 colours we propose) in your order's comment's section.
Long brake lever specific to many models.
Detailed list of compatibilities per motorcycle and year available below.
If you want a color combination we don’t suggest (between main part and 6 positions dial), specify your choice within the 8 available colors in comments before finalizing...
Long brake lever specific to many models.
Detailed list of compatibilities per motorcycle and year available below.
If you want a color combination we don’t suggest (between main part and 6 positions dial), specify your choice within the 8 available colors in comments before finalizing...
Long clutch lever specific to many DUCATI models.
The detailed list of compatibilities per motorcycle and year is available below.
<span lang="en-us"...
Long clutch lever specific to many DUCATI models.
The detailed list of compatibilities per motorcycle and year is available below.
<span lang="en-us"...
Pair of universal LED turn signals in aluminum.
Number of LED on each indicator : 15
Length (out of screw thread) : 36 mm
Width / Diameter : 28 mm
Screw diameter : 8 mm
Wires length : 440 mm
NOTE : Before ordering, just make sure...
Pair of universal LED turn signals in aluminum.
Number of LED on each indicator : 15
Length (out of screw thread) : 36 mm
Width / Diameter : 28 mm
Screw diameter : 8 mm
Wires length : 440 mm
NOTE : Before ordering, just make sure...
Pair of front or rear footpegs, depending on motorycles, aftermarket models built the same as OEM, specific to many DUCATI models. You will find the motorcycles compatibility list below.
Caution : these foot-pegs will perfectly fit your motorcycle, but in...
Pair of front or rear footpegs, depending on motorycles, aftermarket models built the same as OEM, specific to many DUCATI models. You will find the motorcycles compatibility list below.
Caution : these foot-pegs will perfectly fit your motorcycle, but in...
Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals.
Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).
Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals.
Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).
Protection slider for front fork specific to the following APRILIA , MOTO GUZZI , DUCATI. List of compatibilities per motorcycle models are available below for further information.
Note : pictures accurately display the kit, as you will receive it. Only the...
Protection slider for front fork specific to the following APRILIA , MOTO GUZZI , DUCATI. List of compatibilities per motorcycle models are available below for further information.
Note : pictures accurately display the kit, as you will receive it. Only the...
Pair of adhesive grips for the tank sides (right and left traction pads). Specific for DUCATI :
HYPER MOTARD 796 2010 - 2012
HM 1100 / S 2007 - 2012
Non-slip with a finish similar to sandpaper (type 240 for beginner in car painting).
Pair of adhesive grips for the tank sides (right and left traction pads). Specific for DUCATI :
HYPER MOTARD 796 2010 - 2012
HM 1100 / S 2007 - 2012
Non-slip with a finish similar to sandpaper (type 240 for beginner in car painting).
Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.
Measurements and technical information :
LENGTH : 18 cm
Unwound LENGTH : 1,6 m
WIDTH : 2,6 cm
FIXATION TYPE : "S" Hooks with rubber protection
Sold by...
Automatic tie down strap with ratchet tensioner and its 2 hooks to secure the bike transport.
Measurements and technical information :
LENGTH : 18 cm
Unwound LENGTH : 1,6 m
WIDTH : 2,6 cm
FIXATION TYPE : "S" Hooks with rubber protection
Sold by...
Set of EBC brake pads intended for use on the road
Pads approved for road use (TÜV approved)
IMPORTANT: Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here.
You will find the list of compatible motorbikes below in the description.
Set of EBC brake pads intended for use on the road
Pads approved for road use (TÜV approved)
IMPORTANT: Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here.
You will find the list of compatible motorbikes below in the description.
Pair of brake and clutch fluid reservoir caps, in CNC 6061 anodised aluminum, specific for the following DUCATI models :
MONSTER 696 2008 - 2014
MONSTER 796 2010 - 2014
Hypermotard 796 2010 - 2012
Sold by pair only.
Pair of brake and clutch fluid reservoir caps, in CNC 6061 anodised aluminum, specific for the following DUCATI models :
MONSTER 696 2008 - 2014
MONSTER 796 2010 - 2014
Hypermotard 796 2010 - 2012
Sold by pair only.
Set of EBC brake pads Performance designed for intensive use, exclusively for track use.
Pads NOT Approved for road use
IMPORTANT : Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here.
You will find the list of compatible motorbikes below in the...
Set of EBC brake pads Performance designed for intensive use, exclusively for track use.
Pads NOT Approved for road use
IMPORTANT : Please read the description below to find out what each range of plates we offer corresponds to. We do not offer any other range(s) than the one(s) shown here.
You will find the list of compatible motorbikes below in the...
Pair of universal LED turn signals in aluminum and an orange lighting.
Number of LED on each turn signal : 17
Length (out of screw thread) : 86 mm
Width : 38 mm
Screw diameter : 8 mm
Wires length : 210 mm
Pair of universal LED turn signals in aluminum and an orange lighting.
Number of LED on each turn signal : 17
Length (out of screw thread) : 86 mm
Width : 38 mm
Screw diameter : 8 mm
Wires length : 210 mm
Pair of universal LED turn signals in aluminum. E8 E-marked model, with an orange light.
All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in aluminum. E8 E-marked model, with an orange light.
All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).
Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides).
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm
Depth: Hollow...
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).
Measures :
Length: 120 mm
Depth: Hollow...
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole.
For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole.
For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.